# Cleanroom / Fabrication

**URL:** https://forum.kavli.tudelft.nl/c/cleanroom-fabrication/7.md

[Latest](https://forum.kavli.tudelft.nl/latest.md) · [Categories](https://forum.kavli.tudelft.nl/categories.md)

---

## [About the Cleanroom / Fabrication category](https://forum.kavli.tudelft.nl/t/about-the-cleanroom-fabrication-category/16)

<div class="topic-metadata">

**Author:** [@gsteele13](https://forum.kavli.tudelft.nl/u/gsteele13)\
**Replies:** 0

</div>

For questions related to the cleanroom and / or fabrication in the cleanroom Help with a problem: “has anyone seen this before?” Advice: “I want to etch this material, does anyone know a good recipe?” Discussion…

---

## [Cu evaporation experiences](https://forum.kavli.tudelft.nl/t/cu-evaporation-experiences/105)

<div class="topic-metadata">

**Author:** [@Rene](https://forum.kavli.tudelft.nl/u/Rene)\
**Replies:** 3\
**Last updated:** [19 June 2020 08:04 UTC](https://forum.kavli.tudelft.nl/t/cu-evaporation-experiences/105 "2020-06-19T08:04:10Z")

</div>

I saw that e.g. the Leybold L560 can be used to evaporate copper. I was wondering if someone has experience with this. Any experiences would be valuable, but I would be especially interested in experiences for conductan…